Tag Archives: Upgrade

That ‘One Click’ upgrade again, in full

One way of demonstrating the concept of ‘Invisible Infrastructure’ is the ability to complete a full system upgrade with minimal service interruption. In this post I will show the “One Click” upgrade facility that’s available on the Nutanix platform.  This facility allows the admin to upgrade the Nutanix Operating System (NOS), the hypervisor, any required storage firmware and appropriate version of  Nutanix Cluster Check (NCC) for the target NOS release.

You can choose to either upload the NOS upgrade tarball or have it automatically downloaded to a landing area. Just check the Enable Automatic downloads box. Here I am uploading the software to the platform.

You can choose to either upload the NOS upgrade tarball or have it automatically downloaded to a landing area. Just check the Enable Automatic Download box. Here I am uploading the software to the platform.

Similar to the NOS version, the hypervisor can also be upgraded to a newer version when available.

Similar to the NOS version, the hypervisor can also be upgraded to a newer version when available.

You can either select to run the preupgrade checks standalone without performing an upgrade or just select to upgrade directly, in which case the checks are run prior.

You can either select to run the preupgrade checks standalone without performing an upgrade or just select to upgrade directly, those same checks will be run before the start of the upgrade in any case.

Selecting upgrade will show the progress of the various stages of the upgrade as they occur.

Selecting upgrade will show the progress of the various stages of the upgrade as they occur. CVMs are upgraded sequentially and only one CVM is rebooted at a time. A CVM is always back in the cluster membership before the next CVM is restarted.

kvm-preupgrade

You can choose to upgrade the underlying hypervisor as well at this stage.

You can choose to upgrade the underlying hypervisor as well at this stage.

As always you can monitor progress in the Prism main window. Here we see the upgrade process has been completed successfully.

As always you can check progress in the Prism main window. Here we see the upgrade process has completed successfully.

kvm-upgrade-events

Nutanix Prism also shows the individual task info ie task stage, CVM/host involved, time taken etc.

Nutanix Prism also shows the individual task info ie task stage, CVM/host involved, time taken etc.

The Nutanix platform upgrade takes care of all the intermediate steps and just works, regardless of the size of the cluster. There’s minimal impact and disruption as the upgrade takes place and it enables you to carry out such tasks within normal working hours, and not losing a weekend to the usual rigours of a traditional hardware upgrade cycle.

Webscalin’ – adding Nutanix nodes

Most modern web-scale applications (NoSQL, Search, Big Data, etc) are achieving massive elastic scale though horizontal scale out techniques. The admins for such apps require the ability to add nodes and storage for the required scale out without interruption to service. The workflow for adding a node to a Nutanix cluster allows such seamless addition, without any of the complex storage operations such as multipathing, zoning/masking, etc. A node is simply added to the chassis, the autodiscovery service detects the new node and the user is then simply asked to push a button to complete the process. The following are some screenshots of the prescribed workflow…

Connect to the nodes lights out management or IPMI webapp via a browser (enter the IPMI address) and login using the ADMIN credentials. You may need enable java im yor browser and configure java to allow the IPMI address.

After inserting the new node into the chassis slot, connect to the nodes lights out management or IPMI webapp via a browser (enter the IPMI address) and login using the ADMIN credentials. You may need enable Java in your browser and configure Java to allow the IPMI address.

Launch the remote console to access the Hypervisor

Launch the Console to enable remote access the Hypervisor.

Using the menu bar power on the node (if needed) otherwise login and configure network addressing.

Using the ‘Power Control’ drop down on the Menu bar across the top of the frame- Power On the node (if needed). You can at this point set up any L2 networking such vlan tagging etc.

Select 'Expand Cluster' from the right drop down menus in the Prism GUI. The node should be auto-discovered.

Select ‘Expand Cluster’ from the right drop down menus in the Prism GUI. The node should be auto-discovered.

Configure the required network addresses and select 'Save' to add the node to the cluster.

Configure the required network addresses and select ‘Save’ to add the node to the cluster.

The progress of the node addition can be monitored in the Prism GUI. Note that the hypervisor was automatically upgraded in order to maintain the same software functionality across the cluster nodes.

The progress of the node addition can be monitored in the Prism GUI. Note that the hypervisor was automatically upgraded in order to maintain the same software functionality across the cluster nodes.

That’s it, once the node is added and the metadata is re-balanced across all the nodes,  then the new nodes storage (HDD/SSD) is added to the storage pool with the rest of the cluster nodes. At which point all containers (datastores) are automatically mounted onto the newly added host and the new host is ready to receive guests! This kind of ease of use story is becoming paramount in terms of  time to value for many webscale applications. Its all well and good having applications on top of NoSQL DBs that allow for rapid development and deployment. However, if the upfront planning for the underlying architecture holds everything back for days if not weeks, then modern DevOps style operations are much harder to achieve..